Haldane Wheel

A couple of months ago my daughter was given a Haldane Hebridean wheel by a member of the spinning group we attend.  It had belonged to her friend who had moved into smaller accommodation and she no longer had room for it.  People had tried to put it together but it was not being very co-operative about treadling, so it became a project for me!

I had a search for some information and it seems that the company named Haldane still exists, but they make staircases these days rather than wheels!  There are quite a few owners out there, and a Haldane Fanciers group on Ravelry.  After some advice, oiling, adjusting and generally wiggling things about, I managed to get the wheel to treadle and rotate fairly smoothly – most of the problem seemed to be around getting bits to line up correctly.  Originally the treadle bar kept popping out from between the legs and the drive band kept jumping off.  Lining up the legs and then adjusting the whorl so it was lined up with the wheel seemed to resolve most of the problems.  It still has a desire to spin counterclockwise if you don’t treadle just right, but I’m working on that.

The wheel came with the original instructions.  They were amazing – one page of vagueness!  It suggests looking at the (blurry) photo they provide and reading a text book on spinning.  If you want to read more, they are here:  Haldane Instructions 

Once I was convinced that the wheel would actually function I started thinking about the condition of the wood.  It looked blotchy, almost water stained.  In the end I decided to use a wood treatment called Liquid Gold:

 

I bought it from Lakeland for £8.99 – http://www.lakeland.co.uk/liquid-gold-wood-reviver/F/keyword/wood+cleaner/product/22551 

It’s obviously serious stuff, Liquid Gold, if it is misused – I thought this warning image was a very dramatic way of expressing the harm it could do!  I did remember to open the windows and use gloves after seeing this though. 

I took the wheel to bits so I could clean all the parts properly.  One of the things I love about this wheel is that you can see how it works, it is so simple and makes sense!  There are no screws or bolts, everything just slots together.  That didn’t stop me having a slight wobble about how it was all going to go back together again when I got to this stage:

Two of the legs and the wheel supports did not want to come away from the table, so I decided I wasn’t going to force them!

The Liquid Gold itself is clear, but it managed to rub off some of the many years of accumulated grime – the cloth I used became very grubby very quickly.  I was probably a bit too generous with the amount I applied, so having wiped the excess off I left the wheel overnight to soak up what it could.  In the morning I gave it another wipe over and then put it all back together and treated it to a new drive band and some more wheel oil on all the moving parts. 

It looks much better now, you can certainly see a difference in the appearance of the wood:

 

Next plan is to try and acquire a larger whorl – at the moment everything my daughter produces is very overspun and I cannot get her to treadle at anything other than breakneck speed!  Hopefully a big whorl might force things to slow down a bit and encourage her to continue spinning!

17 responses to “Haldane Wheel

  1. What a beautiful wheel! I love the way the Haldanes have a graceful, fairy tale look without being too fussy. One of my when-I-have-a-bigger-home wheels…good luck with it!

    • Cassandra Motz-Mitchell

      Hello,
      I am a Haldane owner located in Sacramento, California. USA
      Geez gosh, Most of the people who own Haldanes seem to be in the UK. I bought my wheel on Ebay 2 years ago. I knew nothing about spinning wheels, I know slightly more than nothing currently. The wheel came disassembled in a box. That was a jigsaw puzzle for a virgin spinner.

      I have not had much success in procuring parts or extra bobbins. Thanks to this sight I was able to get a supplier.
      In my little Ebay experience I ended up with 2 wheels accidently not so haha but its all good. So I am the owner of an Ashford traveler and the Haldane. I love my Haldane. I have gotten it tuned and smooth. The downer is that it does not travel easily. So if I want to spin by the lake it is inconvenient. Am I weird? how many of you take your wheel outside to spin?

      • The Haldanes seem to have a habit of having legs that fall off if you try to move them :) I do sit outside on the patio with my Ladybug, but only on the (rare) days that it is warm and sunny – spinning by the lakeside sounds heavenly!

  2. Hi, I just found this post whilst doing a search for Haldane spinning wheels. I just discovered my wheel is Haldane (it was given to me by my mother in law and her mother had previously used it). I’ve not been spinning for that long but have really got into it, but I really need some more bobbins – do you have any advice as to where I may be able to acquire some? Like you I’ve done a search and just ended up with a load of very random and irrelevant websites. I’d be really grateful if you’d be able to advise me :)
    Thanks a lot,
    Sam

  3. Mary Carolyn Mitton

    07 December 2011. Haldane Bobbins ARE available. I just received 3 perfect ones turned by Woodland Turnery @ My three newly made small bobbins for my Haldane “Lewis” arrived today. For a cost of 18 pounds sterling each plus shipping.

    http://www.woodland-turnery.co.uk

    They are perfect!

    Please contact Joan at the following email address.
    office@woodland-turnery.co.uk

    Mary Caroyn Mitton, “Lewis” Haldane wheel.

  4. I noticed your reference to Haldanes now making staircases, I believe you are looking on the wrong site. The site I always used was http://www.haldanes.co.uk/ this does not seem to be active although it is copyright 2013 however there are some active links to other spinning and weaving sites which may be of interest.

  5. I was looking at some of the yarn you have produced and it is quite impressive. I am still playing with cleaning fleece and thank goodness someone gave me seceral fleeces. At least when I screwed it all up I wasn’t out much. Makes great felted slipper and handbags, plus its practice. There was tons of vege matter and dirt plus a lot of second cuts. Second cuts makes for some fun yarn. Where I am from we don’t call it crap we call it rustic, HaHa. My yarn on my ashford is not very consistent so I guess it mean very little that the wheel doesn’t take up much space.. My yarn from the Haldane is far better and looks pretty good.
    With regard to spinning by the lake I have a little boy who loves to fish. So while I watch him I take the portable wheel and some fiber. The other kids run and play.. It is beautiful to look out from the dock at the boats and birds on the lake. I guess with all that I maybe shouldn’t care so much how my yarn comes out.

    I am going to get a good fleece this year and get serious.

    • Do get a good fleece – struggling along with a matted/grotty fleece isn’t fun and you aren’t getting the chance to do your best spinning if you’re fighting VM and second cuts. There are plenty of sheep out there willing to make your life more enjoyable!

  6. Cassandra Motz-Mitchell

    I am going to the spinners and weaver guild annual textile show tomorrow. I am hoping to get invited to a couple of sheerings. Then I can choose the fleece right there. I am always in awe at the yarn. baskets, and fabrics produced by these artists. I picked up a couple books on types of material and spinning. Hoping the tips will be handy and improve my work.
    While I wait for good fleece I am taking a bash at knitting socks. I am stinking frustrated with turning the heel but I am sure it will all work out in the end.

  7. I have just bought a second hand Haldane wheel, can you tell me where you got your new driveband? Did you succeed in getting a larger whorl? I have been looking without much success. Thanks.

  8. Cassandra Motz-Mitchell

    I use a cord used for stitching leather. It is a non natural fiber, but it is a beige tone and you can melt the ends that way the wheel turns smooth. My teacher spins hemp or linen I am not quite that dedicated.

  9. Received your ‘string’ yesterday and it’s working well, many thanks. I have also got a flexible single drive Ashford band. Thought I might try two parallel drives; flexible to flyer and string to bobbin. Hopefully this will give me more flexibility with take-up speed. Will let you know how it goes. Cheers, Mike

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s